Chemical process pump

1.Overview
HS Type high efficiency,no leakage,no clog pulp pump,in digestion and absorption of foreign advanced pump products on the basis of the combination of domestic paper, pulping enterprises with pump requirements and research and development of a new generation of pulp pump products,It has the advantages of obvious efficiency, good anti-clogging performance and no leakage at run time, convenient installation and maintenance, and is widely used in papermaking and pulping enterprise pulp media transportation.

2. Application range
Pulp and paper making     Sugar and starch making
Industrial waste water    Environmental Engineering

3.Performance range
Capacity range:40-3300m3/h
Head range:5-120m
Pulp density:≤6％
Work temperature:≤120℃
 
4.Structure features
(1)The pump for the rear door structure, maintenance do not have to remove the pipeline
(2)Pump inlet and outlet flange pressure by 1.6MPa design
(3)Impeller with three blades (or six blades), open impeller, high efficiency and does not require axial thrust compensation, easy maintenance, blocking the opportunity is low.
(4)The pump shaft is lubricated with oil, heavy-duty wear-resistant, imported SKF cylindrical roller bearings and radial thrust ball bearings (angular contact ball bearings),Cylindrical roller bearings mounted on the pump end, radial thrust ball bearings are installed face to face in the drive end.
(5)Shaft seal mainly has a pump ring plus single end machine seal, packing seal, single-end machine seal, tandem machine seal, double-end machine seal, pump ring and single-end machine seal combination seal, dynamic seal six types, Can be selected according to the requirements and actual use conditions.
(6)Impeller with lost wax precision casting and dynamic balance check.
(7)Materials are cast iron, cast steel, ordinary stainless steel, two-phase stainless steel.